*****************************************************************************************
Project Opensky Pushback Tug Patch 
Pushback Panel v2.0
Microsoft Flight Simulator 2004
*****************************************************************************************
© 2006 Harrier Panels, Inc. All Rights Reserved. 
*****************************************************************************************
IMPORTANT: Before installing the patch make sure the
the Pushback Panel v2.0 is installed.
*****************************************************************************************
	
		http://harrierpanels.avsim.ru


	CONTENTS:
	1. Introduction.........................................[ 1 ]
	2. Installation and Removal....................... [ 2 ]
	3. Technical Information...........................[ 3 ]
	4. Instructions of Usage............................[ 4 ]


-----------------------------------------------------------------------------------------------------------------
		1. Introduction:

-----------------------------------------------------------------------------------------------------------------
This patch allows you to use Pushback Panel v2.0 for the Project Opensky Pushback vehicle 
( PTS-1 ) by Hiroshi Igami.
-----------------------------------------------------------------------------------------------------------------

		2. Installation and Removal:

-----------------------------------------------------------------------------------------------------------------
		Installation
-----------------------------------------------------------------------------------------------------------------

2.1 To install the patch start the program Patch.exe. 
Follow the instructions of the installation program. The program will install the following files:

--------------------- 
\Gauges\ 
HarrierOS.cab
posky.bmp
----------------------  


2.2 Choose the aircraft this panel will be used with.

2.3 Configure the panel.cfg of your aircraft as follows:

	a. In the section [Window Titles] add the line

Window**=Posky Pushback Panel 2
	
 ** - a sequence number of the Pushback Panel in the Instrumental Panel menu
     	
	b. Add the following string to [Window00] section
                                
gauge**=HarrierOS!HarrierIcon_pbos, aaa, bbb, 12,12

	    ** - a sequence number of the guage, ààà & bbb - are the coordinates for the
	    Announcement Icon on your aircraft's main panel and 12,12 is the size in pixels. For the default
	    MS2004 Boeing 777-300 the string is as follows:
	    gauge38=HarrierOSr!HarrierIcon_pbos, 156,457,12,12 
	
	c. Add a new window section (see a.) after the last default [WindowXX] section of your aircraft:

//--------------------------------------------------------
[Window**]
Background_color=16,16,16 
size_mm=82,103
window_size_ratio=1.000  
visible=0
ident=77777777
window_size= 0.067, 0.105
window_pos= 0.462, 0.280

gauge00=Harrier_pushback2!Harrier_pb,  0,0
gauge01=HarrierOS!Harrier_pbos_Switch,  50,5,28,31
gauge02=Harrier_pushback2!PushbackDisplay,         4,39,74,61
gauge03=HarrierOS!Harrier_pbos,  5,5,43,31
gauge04=Harrier_pushback2!PushbackStates, 0,0
gauge05=Harrier_pushback2!BrakeSound, 0,0
gauge06=Harrier_Sound!dsd_xml_sound3, 0,0,,, ./sound/HarrierPushback2/ENG/Sound.ini

	 ** - a sequence number of the Pushback Panel

	d. Save your panel.cfg file.

2.4 See 4. Instructions of Usage.
------------------------------------------------------------------------------------------------------------------------------
			REMOVAL
-------------------------------------------------------------------------------------------------------------------------------
2.5 Run UninstallPB2OS.exe from within the main FS9 folder or from the Programs Menu.

2.6 Open in the notepad the panel.cfg file of the aircraft you used the panel with.

2.7 Follow the steps in the 2.3 section of this manual to delete the entries you added during the installation.
--------------------------------------------------------------------------------------------------------------------------------
		3. Technical Information:
--------------------------------------------------------------------------------------------------------------------------------

The patch enables Pushback Panel v2.0 to use Wingfold command in FS2004 to toggle ON/OFF the Project 
Opensky Pushback truck ( PTS-1 ). The patch comes with a default bitmap (posky.bmp) of Project Opensky
Boeing 767-300 V4 (Air Canada livery) that can be replaced with any other.

--------------------------------------------------------------------------------------------------------------------------------
		4. Instructions of Usage:
--------------------------------------------------------------------------------------------------------------------------------

4.1 See the Pushback Panel v2.0 manual (not included in this package).
--------------------------------------------------------------------------------------------------------------------------------

Three green!

Harrier
http://harrierpanels.avsim.ru

--------------------------------------------------------------------------------------------------------------------------------
Sugestions or Comments, Need support or advice from pros?
Please visit our forum: http://harrierpanels.avsim.ru/forum/
--------------------------------------------------------------------------------------------------------------------------------
© 2006 Harrier Panels, Inc. All Rights Reserved. E-mail: avsim@inbox.ru