My name is 

Mathias Pertl 

.. and i´ve done this for you all!
for technical problems email me under: 

mathias.pertl@aon.at!

so.. this is the readme
you know this are the strings to be needed to open the doors without searching the whole panel settings

this is an example for how it can look (this is for the CLS panel)
go to the aircraft folder.. select the subfolder Panel..there is a file which calles "panel.cfg" open it the there are much lines.. look for the section [window00] like below
the strings "gauges" hold the information for the instruments of the panel and there you need to add ONE string.. this one is "marked" below 
the "panel editing" file in this zip holds all FULL strings for every aircraft (airbus) and all you need to do is to change the "hauge number" :gaugexx (1,2,..) but it has to be the following number from the highest last number!

so. copy and paste the strings ..change the number (if needed ..(not for CLS 340-500/600 Panel user)) save and its done!

THE EXAMPLE OF A WINDOW00 SECTION:
//--------------------------------------------------------
[Window00]
file=MAIN.bmp 
size_mm=1600
window_size_ratio=1.000  
position=7
visible=1
ident=MAIN_PANEL
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

gauge00=Z_AB340CLS!EICAS_UPPER,  1115,704,296,296
gauge01=Z_AB340CLS!PFD,  46,704,319,304
gauge02=Z_AB340CLS!FLIGHT_DIRECTOR,  623,588,39,22
gauge03=Z_AB340CLS!SWITCH_LS,  673,589,39,22
gauge04=Z_AB340CLS!BARO_ADJUST,  632,475,69,85
gauge05=Z_AB340CLS!RMI,  881,913,179,187
gauge06=Z_AB340CLS!RMI 1 Switch,  761,588,33,10
gauge07=Z_AB340CLS!RMI 2 Switch,  887,588,33,10
gauge08=Z_AB340CLS!GEAR_LEVER,  1486,997,51,147
gauge09=Z_AB340CLS!EICAS_LOWER,  1116,1055,296,296
gauge10=dsd_xml_config!config,  94,545,19,19,.\Gauges\a346cls_config.ini
gauge11=dsd_fuel_dump!fuel_dump_transparent,  122,545,19,19,.\Gauges\a346cls_fuel_dump.ini
gauge12=dsd_xml_sound2!dsd_xml_sound2,  145,545,19,19,.\Gauges\a346cls_sound.ini
gauge13=Z_AB340CLS!ECAM_SWITCH,  779,1144,64,62
gauge14=Z_AB340CLS!CAPTAINS_DISPLAY,  412,704,319,304
gauge15=Z_AB340CLS!MFD SWITCH,  750,519,49,49
gauge16=Z_AB340CLS!ND_CRS,  725,469,39,22
gauge17=Z_AB340CLS!ND_WPT,  771,469,39,22
gauge18=Z_AB340CLS!ND_AIRPORT,  817,469,39,22
gauge19=Z_AB340CLS!ND_VOR,  863,469,39,22
gauge20=Z_AB340CLS!ND_NDB,  909,469,39,22
gauge21=Z_AB340CLS!MASTER_WARNING,  374,505,36,36
gauge22=Z_AB340CLS!MASTER_CAUTION,  374,562,36,36
gauge23=Z_AB340CLS!ICON_ECAM_PANEL,  788,1057,45,12
gauge24=Z_AB340CLS!RANGE SWITCH,  878,519,49,49
gauge25=km_random_number!single_instance,  168,545,19,19
gauge26=Z_AB340CLS!RANDOM_LOAD,  190,545,19,19
gauge27=Z_AB340CLS!ICON_FMC_PANEL_TRANS,  7,558,46,42
gauge28=Z_AB340CLS!ELECT_SETUP,  213,545,19,19
gauge29=Z_AB340CLS!Gear Light Left,  1480,799,29,29
gauge30=Z_AB340CLS!Gear Light Left,  1510,799,29,29
gauge31=Z_AB340CLS!Gear Light Right,  1540,799,29,29
gauge32=Z_AB340CLS!Gear Light Nose,  1511,753,29,29
gauge33=Z_AB340CLS!A340-600_IESI,  877,683,189,180
gauge34=Z_AB340CLS!A340-600_CLOCK,  880,1119,185,169
gauge35=Z_AB340CLS!GEAR_TRANS_INDICATOR,  1536,1107,6,28
gauge36=Z_AB340CLS!ICON_ICONS,  582,1052,33,27
gauge37=Z_AB340CLS!TRUE_MAG_SWITCH,  797,1091,26,8
gauge38=Z_AB340CLS!A340-600_CHRONO_BUTTON,  479,499,44,40
gauge39=Z_AB340CLS!ND_CRS,  1564,473,39,22
gauge40=Z_AB340CLS!AUDIBLE_WARNINGS,  243,545,19,19
gauge41=Z_AB340CLS!A340-600_FCU,  975,455,583,168
gauge42=Z_AB340CLS!AUTOBRAKE_RTO,  1465,879,31,31
gauge43=A346CLS_AUTOBRAKE,  1490,825,125
---------------------------------------------------	(this lines are just for marking the string dont add them to the cfg file!!)
gauge44=PAPA330!Door Display,  100,500,250,250		(this is the string you need to add)
---------------------------------------------------
//gauge45=reset panel!Panel Reload,  70,20,20,20