I am now having problems with the PFD on the Eaglesoft citaion x 2.0 I read the manuals and watched tutorials but every time on my PFD it says ATT fail Hdg Fail an please help!
0
Eaglesoft Citation X 2.0 PFD fail
Started by
sdspinelli
, May 29 2011 08:04 PM
8 replies to this topic
#1
Posted 29 May 2011 - 08:04 PM
#3
Posted 29 May 2011 - 08:30 PM
Not quite that simple, Romario...
step 1
continous power to the aircraft, don t care if its ground power or APU, APU is recommended.
Step 2
On the FMCs, go to POS INIT
Step three, select the GPS one, nothing else...
Step 4
Turn the IRS selector knobs to NAV mode, NOTHING ELSE. ATT is for when all power from the engines goes offline. Nav, and ONLY Nav
So far, the OP has failed to have a legimate problem other than not reading the manual. Go read the manual next time, and stop whining when things are working right. DO IT EXACTLY HOW IT TELLS YOU TO DO IT OR IT WILL NOT NOT NOT NOT NOT NOT NOT WORK...I forgot to mention, if you do anything out of step, it won't WORK.
step 1
continous power to the aircraft, don t care if its ground power or APU, APU is recommended.
Step 2
On the FMCs, go to POS INIT
Step three, select the GPS one, nothing else...
Step 4
Turn the IRS selector knobs to NAV mode, NOTHING ELSE. ATT is for when all power from the engines goes offline. Nav, and ONLY Nav
So far, the OP has failed to have a legimate problem other than not reading the manual. Go read the manual next time, and stop whining when things are working right. DO IT EXACTLY HOW IT TELLS YOU TO DO IT OR IT WILL NOT NOT NOT NOT NOT NOT NOT WORK...I forgot to mention, if you do anything out of step, it won't WORK.
#4
Posted 29 May 2011 - 08:37 PM
Dirtbuckets, on May 29 2011, 08:30 PM, said:
Not quite that simple, Romario...
step 1
continous power to the aircraft, don t care if its ground power or APU, APU is recommended.
Step 2
On the FMCs, go to POS INIT
Step three, select the GPS one, nothing else...
Step 4
Turn the IRS selector knobs to NAV mode, NOTHING ELSE. ATT is for when all power from the engines goes offline. Nav, and ONLY Nav
So far, the OP has failed to have a legimate problem other than not reading the manual. Go read the manual next time, and stop whining when things are working right. DO IT EXACTLY HOW IT TELLS YOU TO DO IT OR IT WILL NOT NOT NOT NOT NOT NOT NOT WORK...I forgot to mention, if you do anything out of step, it won't WORK.
step 1
continous power to the aircraft, don t care if its ground power or APU, APU is recommended.
Step 2
On the FMCs, go to POS INIT
Step three, select the GPS one, nothing else...
Step 4
Turn the IRS selector knobs to NAV mode, NOTHING ELSE. ATT is for when all power from the engines goes offline. Nav, and ONLY Nav
So far, the OP has failed to have a legimate problem other than not reading the manual. Go read the manual next time, and stop whining when things are working right. DO IT EXACTLY HOW IT TELLS YOU TO DO IT OR IT WILL NOT NOT NOT NOT NOT NOT NOT WORK...I forgot to mention, if you do anything out of step, it won't WORK.
By saying Align the IRS, I thought the OP knew that those were pre-requisites . But, yes, I do suggest to read the manual
#5
Posted 06 June 2011 - 03:54 PM
I read the manual and I still cant figure it out! On the FMS it says "DATA BASE OUT-OF-DATE" at the bottom! All i want to do if fly this amazing bird. is there any update if so where can I get it?
#6
Posted 06 June 2011 - 05:09 PM
#7
Posted 06 June 2011 - 06:07 PM
Navdata...but of course if you read the manual you d have known that.
#8
Posted 07 June 2011 - 02:37 PM
I know it says That it means navdata folder out of date but how do i update it?