My scenery
#1
Posted 27 August 2004 - 11:07 PM
YAY! now that I don't have to worry about school for the next few days it finally gave me a chance to work on my scenery!
First off I apoligize for the shots but my pixels are all screwed up so I had to go on a lower resoultion than normal.
I placed a few more macros today including the hanger and dock,
Hanger, complete with airplane inside
Fixed up the scenery from last time:
Dock
#2
Posted 27 August 2004 - 11:28 PM
#3
Posted 27 August 2004 - 11:37 PM
#4
Posted 28 August 2004 - 01:24 AM
Fox, on Aug 28 2004, 12:07 AM, said:
#5
Posted 28 August 2004 - 09:17 AM
Right now its just a rough thing when i comes to the layout (Just a runway with big slab )
#6
Posted 28 August 2004 - 12:38 PM
#7
Posted 28 August 2004 - 12:42 PM
As of right now I only have one thing on my list checked off, which is the updated ground/mountain mesh.
Edited by Fox, 28 August 2004 - 12:43 PM.
#8
Posted 28 August 2004 - 03:53 PM
#9
Posted 28 August 2004 - 03:56 PM
#10
Posted 28 August 2004 - 05:14 PM
Just got done with FBO office:
The smaller things like the parking lines, coke units, and fed-ex mail box will not be in the FPS friendly (Lite) version.
Edited by Fox, 28 August 2004 - 05:15 PM.
#11
Posted 28 August 2004 - 07:52 PM
#12
Posted 29 August 2004 - 09:42 AM
Fox, on Aug 28 2004, 10:17 AM, said:
Right now its just a rough thing when i comes to the layout (Just a runway with big slab )
Since you haven't started on the AFCAD yet, you've built the runway and ramp in something else, right? Make sure you have the coordinates recorded so you can accurately place those in AFCAD. And don't forget: AFCAD uses xx* xx.xxxx' format for lattitude and longitude; so you'll have to convert E42* 37' 15.1682" into E42* 37.2511' for AFCAD to put it down correctly. (That's the seconds (") divided by 60, then the decimal value attached to the minutes.)
Regarding some of your other screenshots, what macros did you use for the pick-up trucks? Would you mind providing the link? I can use those to populate part of the motor pool at my "private" test airbase KLKH. You haven't run across any macro sets of construction equipment anywhere, have you?
Good work, Fox .... and to think that just a few weeks ago you were ready to give it up altogether! Aren't you glad you didn't? It can be VERY frustrating at times, but when you see it coming together (like yours is now), it all seems worth it somehow.
#13
Posted 29 August 2004 - 09:01 PM
For the Macros I used "Extra Objects"
http://library.avsim...04sd&DLID=47706
None of a construction site i've seen so far
Edited by Fox, 29 August 2004 - 09:02 PM.
#14
Posted 29 August 2004 - 10:17 PM
Fox, on Aug 29 2004, 10:01 PM, said:
For the Macros I used "Extra Objects"
http://library.avsim...04sd&DLID=47706
None of a construction site i've seen so far
Thanks for the link; since that "private" airbase is joint-use, extraobjects will give me a pretty good variety of vehicles to put in the motor pool. As for the construction vehicles, I think I may have to make them myself .... not looking forward to that, because they're a real to design.
#15
Posted 29 August 2004 - 10:25 PM
Edited by mississippi, 29 August 2004 - 10:26 PM.
#16
Posted 30 August 2004 - 01:49 AM
#17
Posted 30 August 2004 - 05:39 AM
#18
Posted 30 August 2004 - 05:01 PM
#19
Posted 30 August 2004 - 08:26 PM
#20
Posted 30 August 2004 - 08:34 PM
Edited by TimW, 30 August 2004 - 08:35 PM.