Project PALWAUKEE
#1
Posted 05 July 2005 - 07:39 PM
Thanks for all of your help.
By the way: Palwaukee is my local airport and is mostly GA has an ILS approach and the PAL-WAUKEE 2 TWO departure, and some private jets fly there.
#2
Posted 05 July 2005 - 08:11 PM
Edited by wildwobby, 05 July 2005 - 08:12 PM.
#3
Posted 05 July 2005 - 08:13 PM
AFCAD's are required to make the AI work!
#4
Posted 05 July 2005 - 09:31 PM
#5
Posted 05 July 2005 - 10:13 PM
@Glacier BLUe- So they make a big plane and then allign it with the afcad?
also, of course im not there yet, and the control tower is just a preview, but how would i put the light textures on? Also, of course those aren't the final textures .
P.S. thats 1102 polys... mostly because of the sphere that makes the dome... should i lower the poly count of it?
eDIT: got polys now to a total of 272 no quality lost... it was all the sphere on top...
Edited by wildwobby, 05 July 2005 - 10:20 PM.
#6
Posted 05 July 2005 - 10:15 PM
#7
Posted 05 July 2005 - 10:15 PM
#8
Posted 05 July 2005 - 10:21 PM
EDIT: I have also emailed Palwaukee asking for information about the runway lighting and stuff... hopefully they will email me back with a lot of info...
Edited by wildwobby, 05 July 2005 - 10:26 PM.
#9
Posted 05 July 2005 - 10:35 PM
#10
Posted 05 July 2005 - 10:41 PM
#11
Posted 05 July 2005 - 11:02 PM
C172pilot, on Jul 5 2005, 10:35 PM, said:
#12
Posted 06 July 2005 - 04:44 AM
#13
Posted 06 July 2005 - 11:10 AM
What do I need to make that stuff? Help!
#14
Posted 06 July 2005 - 11:13 AM
Duke, on Jul 6 2005, 03:44 AM, said:
#15
Posted 06 July 2005 - 11:53 AM
wildwobby, on Jul 5 2005, 08:02 PM, said:
C172pilot, on Jul 5 2005, 10:35 PM, said:
That shows you how to do it for an airplane, but i think you can just act like its the tower
#16
Posted 06 July 2005 - 12:39 PM
#17
Posted 06 July 2005 - 02:12 PM
wildwobby, on Jul 6 2005, 09:39 AM, said:
#18
Posted 07 July 2005 - 02:13 AM
B737, on Jul 5 2005, 08:41 PM, said:
#19
Posted 07 July 2005 - 11:02 AM
Looks like a nice looking tower there you have created in GMax!
Mark.
Edit: How come there is a huge blank space on page 1, below B737's post?!
Edited by Mark05, 07 July 2005 - 11:03 AM.